Electropedic® Showroom

1035 E. Camelback Road

Phoenix (800)733-1818

Link to Map:

85014


 

SERVING ALL PHOENIX AZ METROPOLITAN AREA
FACTORY DIRECT PRICES  (800)733-1818 
Chandler Gilbert Glendale Mesa Peoria Scottsdale Surprise Tempe

1035 E. Camelback Road, Phoenix
Open Mon thru Fri 10-5, Sat 10-4, Sun 12-4
 (800)733-1818 

<p align="center"><strong>PL-50 </strong></p><p align="center"><strong style="font-weight: 400">Buy, Sell &amp; Trade</strong></p>

Mac Porch Lift Information: Please read before you buy

wheelchair elevator

If you are using the Mac Porch Lift for a simple Porch-type Setting, we would highly recommend the MAC Porch Lift PL-52 (for up to 52") or the PL-72 (up to 72") Most units, like the Mac Porch Lift, fits most applications under 5 and 6 feet.  You have to start with a concrete slab underneath your unit, usually about 4 feet by 5 feet.  After that, the Mac Porch Lifts are pretty easy to install:  4 concrete bolts and setting the correct height.  Your unit pretty much comes completely assembled.  All you need as standard electricity (110) power source.  Mac Porch Lifts provide a smooth, quiet ride and are virtually maintenance free once they are installed.  We have Vertical Platform Lifts that travel up to 12 feet.  All our customers want the same three things:  The Best Price, Reliability and Safety.

wheelchair elevator by macslift.com macs pl-52 and pl-72 vertical platform lift
Mac's Mac Porch Lift Info:  Macslift vertical platform lift pl52 and pl72Before you buy an Electric Mac Porch Lift, it is necessary to know a couple of important pieces of information.  There are many manufacturers and models available.  If you are looking for the most Economical, Safe, and very Reliable Technology, we can highly recommend the Macs Lift.  The  Mac Vertical Home Lift PL-52 & PL-72 was designed and engineered for home use - outdoor and exterior use for a porch or small step area.  It's easy to operate, easy to install and virtually maintenance free.  This is the Most Affordable Residential Lift System Available.   n Extension Cord, 14 gauge UL-CSA approved is recommended if power source is not within three (3) feet of Machine tower. Mac Porch Lifts are completely Macs Wheelchair Elevator Macslift.com PL-52 and PL-72weatherized.  Mac Porch Lift's are still a little too complicated to buy without first talking to a Mac Porch Lift Specialists to put "all your ducks in a row."  After a brief conversation, everything becomes rather simple.  After 45 years making "Your 100% Total Satisfaction Is Our Only Goal" we'd rather not make a sale, then to sell you the wrong product, especially where your safety may be at issue.  Results are what we are both after:  We understand that you want a Mac Porch Lift that will be safe, practical and easy to use.  Download the PL-50 Document  Download the PL-72 Document

When you call us, we will be drawing a picture on actual paper of the details you are telling us.  Are you planning to use the unit by yourself, or will you be having the assistance of someone else.  Are you going to be on a manual wheelchair, electric wheelchair or scooter?  Indoor or Exterior Outdoor Usage?  How are you going to enter the unit; and how are you going to exit?  How high are you going to need the unit.  Is it a commercial setting, porch, home, stage, school, etc.  Are you going to need a solid door?  remote call and send buttons? Are you planning to put the tower on the left side or right side?

Since we've been asking the same questions every single day, we are here trying to find the FACTORS to your 100% Total Satisfaction.

Many disability units come with a built-in safety feature on the bottom of your vertical platform lift:  when your disability unit hits an obstruction, the unit will automatically stop (ADA required). Many disability units are UL approved and all disability units have constant pressure switches; and a manual emergency hand crank. 

There are several manufacturers and models available and ElectroEase.com is dedicated to giving you the best price, quality, guarantee and service.  Since 1964 we have made "Your 100% Total Satisfaction Our Only Goal" and our secret formula for success is too look after your INTERESTS first.  We realize also that COST is a primary concern whether you are a millionaire or are primarily living off Social Security.  We pride ourselves on doing something for the Quality of Your Life.  Today, 25% of our business is built upon repeat and referral customers.  Many of our customers have 3 and 4 of our products.  After we find the FACTORS to your needs, we will be glad to offer you our Customer Friendly Prices that are Guaranteed the WORLD'S LOWEST PRICE: (800)354-5040.

Mac Porch Lift Product Description

Platform Wheelchair Lift, pl-50, pl50, pl 50, PL-50, disability

Used Porch Lifts 1/2 OFF (800)233-7382

MAC's Vertical Home Lift Specifications The MAC's Vertical Home Lift was designed and engineered for home use. It's easy to operate easy to install and virtually maintenance free. Every safety detail has been carefully designed into the PL-50 and PL-72, including a non-slip platform, constant pressure switches, a low platform for easy roll-on/roll-off, safety barrier and railing, and rolled edges.

The PL-50 and PL-72 are sturdy enough to lift and lower up to 600 pounds and will accommodate electric wheelchairs and scooters. Running on a gear box and chain, the PL-50 and PL-72 provide a smooth and quiet up and down ride, requiring little maintenance. All mechanics are fully enclosed, yet easy to access through the rear or front of the housing unit. The lifts are completely weatherized and attractively finished in off-white. Shipped fully assembled, the PL-50 and PL-72 install in 6 easy steps. The Mac's Vertical Home Lifts are the economical and practical answer to stair barriers.

Quality Assurance Manufacturing A company with not less the thirty eight (38) years of experience in the design, fabrication and installation of specialized lifting equipment for handicapped and geriatric consumers should supply the lift.

Performance Requirements The unit shall be assembled and prewired (less optional equipment and necessary gates) and manufactured with adequate lifting and load capacity for application described elsewhere in this specification. The unit shall be easy to operate by the user or attendant and shall be capable of functioning in all weather conditions.

The unit shall have the capacity to lift up to 500 lbs. to the desired lifting height up to a maximum lift height of six ( 6 ) feet.

Composition of Materials Machine tower: 14 gauge cold rolled steel. Base frame: 1 1/2" square x 3/16" Structural steel tubing. Lift weldment: 1 1/2" x 3" x .188" wall structure steel tubing. Tower cap: 10 gauge cold rolled steel plate Side Guard Rails: 1" round x .120" gauge steel tubing (frame). Platform: 14 gauge cold rolled steel plate with slip resistance surface. Access ramp: 11 gauge steel plate with slip resistance surface. Electrical box: 16 gauge galvanized steel Switch box: Hi-impact A.B.S. Thermoplastic instrument case. Limitations: Vertical platform lift shall operate both indoors and out, and must be anchored on a level, 4" thick, 3500 psi reinforced concrete surface or pad.

Electrical System & Wiring: The unit shall be pre-wired by manufacturer with exterior grade thermoplastic coated wiring. Extension Cord, 14 gauge UL-CSA approved is recommended if power source is not within three (3) feet of Machine tower. Machine may also be wired using water proof conduct.

Powder Coat Finish Prep, Primer, & Powder Coat Process

1. 3 Stage wash, soapy water, clear water, and Iron Phosphate which is applied to parts.

2. Parts are inspected and scuffed

3. Epoxy Primer is applied

4. Parts are baked at 250 degrees for 15 minutes

5. Parts are inspected and scuffed if needed

6. Huebert O'Brian Powder-TCIC Polyester

7. Mixed with Paint, Color Almond PFT-500-SS

8. Powder Coat is applied and baked at 400 degrees for 30 min.

9. Parts are inspected and scuffed if needed

Safety Devices

The unit shall have the following safety features for protection of users and the general public: Mac Porch Lift Upper and lower limit switches

Mac PorchLift Instant Reverse Motor

Macs PorchLift Powered with 110 volt AC current, by 1/2 HP motor, 6.4 Amp

Mac's Porch Elevator Grounded electrical system

MacsLift Porch Lifter Heavy duty worm drive gear box with heavy duty #50 lifting chain

Mac PorchLift Automatic access ramp

Mac's Porch Lifter 36" guard rails on non-enter and exit sides of platform

Macs Porch Lifts Non-Skid platform and access ramp surface

Macs Porch Lifts Key-lock control

MacsLift.com Porch-Lift Switching & Control system 24 VAC low voltage currentInstallation

The contractor shall do all work and supply all materials necessary for the complete installation, It is the intent of this specification to outline broadly the equipment required but not to cover the details of design and construction.

Maintenance Maintenance of the vertical platform lift unit shall consist of regular cleaning of the unit, protection of the painted surface of the unit.

Warranty Unit shall have one ( 1 ) year limited warranty on the basic unit and electrical system with a two (2) year warranty of drive train components.

Note This specification has been written to assist you and your consumer in preparing an accurate and detailed description for specifying a vertical platform lift. All or part of this specification may be reproduced. Additional technical information is available from our Product Engineering Department.

Download the PL-50 Porch Lift Document
 Download the PL-72 Porch Lift Document

 

porch liftwheelchair elevatorYour 100% Total Satisfaction Is Our Only Goal!

We understand that Wheel Chair Vertical Platform Porch Elevator Lifts may be a little too complicated to simply buy without first talking to a Specialist:  Finding the best solutions at the lowest price is what we do best.  You can shop with confidence when you shop with one of our Specialists. Your 100% Total Satisfaction is our only goal!  Please call for full information; you will be glad that you did. 

vertical platform lift

Member BBB - Member WHFA - Joint Commission Medically Accredited - Since 1964

 

SERVING ALL USA - We ship direct from 5 different Factory's to your Home
or visit our own Factory Showrooms:
Burbank/CA Factory Showroom 907 Hollywood Way(800)233-7382
Garden Grove/CA Showroom 12557 Harbor Blvd.(800)824-3145
Phoenix AZ 1035 E. Camelback Rd (800)733-1818
San Jose, CA Dealer 209 S 14th Street (877)233-7382
Denver, CO Dealer (800)354-5040

WORLD'S LOWEST PRICES (800)354-5040
SERVING ALL USA!

Ca-Los-Angeles